Discription
Speciality cleaner designed to revitalise water repellency and breathability for all animal coats and rugs. Easy to use in a washing machine or by hand.
For cleaning animal coats and rugs
Technical cleaner for animal rugs and blankets
Cleans effectively, revitalises insulation and restores water repellency
Revives the performance of rugs and blankets, keeping your animal warmer and drier
Recommended for Rambo® and all other animal rugs and blankets
Why breathability is essential for the comfort of your animal...
Your animal is most likely to get clammy and uncomfortable in wet or damp conditions if the breathability of their waterproof rug or coat is impaired. If the outer fabric absorbs water, the rug/coat can lose up to 70% of its breathability. Therefore, the Durable Water Repellency (DWR) on the outer fabric of your animal rug/coat must be maintained to ensure comfort. It will eventually wear off and need to be renewed with Nikwax Rug Proof™.
Waterproof fabrics need to be breathable...
Some animals, including dogs and horses, can be subjected to the elements whilst outside. When it rains, waterproof rugs and coats are used to keep them dry and comfortable. It is important that these waterproof fabrics allow moisture vapour to pass through them, or ‘breathe’; otherwise moisture cannot evaporate, so will condense on the inside of the item. Additionally, if the outer fabric absorbs water and ‘wets out’ the item’s breathability will be reduced. Both of these situations will lead to your animal getting clammy, cold and uncomfortable. The breathability of rugs and coats can be maintained by ensuring the Durable Water Repellency (DWR) is kept in good condition. Nikwax Rug Proof™ adds DWR, which prevents water absorption, whilst maintaining breathability, keeping your animals dry and comfortable.
Use Nikwax Rug Proof™ when your animal rugs and coats soak up water...
Your waterproof animal rugs and coats could be soaking up water just because they are dirty. First, try cleaning them with Nikwax Rug Wash™ and if your animal rug or coat is fairly new, or recently re-waterproofed the Durable Water Repellency (DWR) will be revitalised just from cleaning. But, once the rug/coat has been thoroughly worn, you will need to add DWR, using Nikwax Rug Proof™, after cleaning first with Nikwax Rug Wash™.
Cleaning properly can be as important as waterproofing...
Using the right cleaning product is as important as using the right waterproofing product. Conventional detergents leave behind a thin water-absorbent film on materials, which masks their water repellency (DWR). Therefore, always clean your animal’s waterproof rugs and coats with Nikwax Rug Wash™. Remember that dirt itself works against water repellency, so regular cleaning will enhance performance.
How Nikwax Rug Proof™ protects your animal...
Nikwax Rug Proof adds Durable Water Repellency (DWR) whilst maintaining breathability. It is quick and easy to apply in the washing machine, and its DWR develops on air drying. Nikwax Rug Wash™ has been specifically designed and optimised for breathable waterproof animal rugs and coats. It leaves a flexible water repellent treatment on individual fibres allowing moisture vapour to pass through, maintaining breathability, while protecting your animal from getting wet in the rain. Finally, washing machine application ensures that the treatment goes right through the rug or coat, treating seams, tapes and cords, as well as the fabric.
This product is ideal for
- Horse Kits
can be used in washing Mashine and be hand washed.
Apply Nikwax Rug Proof™ in the washing machine...
For best results always clean rug first with Nikwax® Rug Wash™. No need to dry item(s) before waterproofing. It is vital that rugs are washed and rinsed thoroughly. Shake well before use. Follow care label instructions.
Top Loading Machine Wash:
- Remove all detergent build-up from the detergent dispenser.
- Place clean rug in washing machine.
- Use 500 ml for 1 rug. Treat 1 rug per load.
- Run 30°C cotton cycle.
Air dry or tumble dry on a low setting if care label allows.
Use Nikwax Rug Proof™ by hand...
For best results always clean rug first with Nikwax® Rug Wash™. No need to dry item(s) before waterproofing. It is vital that rugs are washed and rinsed thoroughly. Shake well before use. Follow care label instructions.
- Wear gloves. Use 500 ml for 1 rug, with 10 litres of hand-hot water in vessel.
- Agitate to mix, push down into vessel so that whole rug is immersed.
- Add a further 15 litres of warm water to cover rug and agitate.
- Leave to soak for 2 hours, agitating occasionally.
- Rinse in cold water until water runs clear.
Air dry or tumble dry on a low setting if care label allows.
Sponge on Nikwax Rug Proof™...
For best results always clean rug first with Nikwax® Rug Wash™. No need to dry item(s) before waterproofing. It is vital that rugs are washed and rinsed thoroughly. Shake well before use. Follow care label instructions.
- Wear gloves. Spread clean rug on clean area and wet thoroughly with a hose.
- Use 500 ml for 1 rug, with 1.5 litres of hand-hot water.
- Using a new sponge apply solution to rug, working into fabric and seams.
- Use any surplus on back area of rug, leave for 5-10 minutes.
- Rinse in cold water until water runs clear.
Air dry or tumble dry on a low setting if care label allows.
